Low emissions
Description
The ATTACK DP 35 Profi wood gasifying boiler is intended for economical and ecological heating of the family houses, small plants, work stations and similar objects. Wood is the main fuel for the ATTACK boilers. By full utilization of the feeding chamber there is possibility of the continual burning for 8- 12 hours.
Gasification of wood and the following combustion of the wood gas ensures optimal burning of all combustible contents. The combustion is regulated by the flue gas fan. Boiler body is isolated by a mineral wool. The boiler covering is treated by a powder paint.
Advantages of boilers Attack DP Profi
The ecological warm water boilers ATTACK DP Profi are intended for heating of dwelling houses and industrial objects. The boilers are constructed for combustion of the wood logs. It is possible to use any kind of dry wood, e.g. wood logs of the length adequate to the boiler type. The wood gasifying boiler ATTACK DP is a modern boiler that gets maximum from wood thanks to its technology and saves the environment by ecological combustion. The wood is a favourite fuel, as it produces comfortable warmth and grows right outside your door.
ATTACK DP Profi
The wood gasifying boiler ATTACK DP Profi is controlled by an electronic regulator for regulation of temperature of the warmwater wood boilers. The Profi version of ATTACK DP boilers in comparison with the Standard version has advantage of the higher comfort of operation and the possibility of the boiler output modulation to achieve the optimal parameters of wood combustion. The regulator permanently measures the temperature of water in the boiler, displays its value and controlls the flue gas thermostat and the pump of central heating.
| Nominal output (Standard version) | - kW |
| Output range (Profi version) | 14 – 35 kW |
| Heat exchange area | 1,74 m² |
| Volume of the feeding chamber | 158 dm³ |
| Dimension of the feeding door | 235 x 445 mm |
| Prescribed chimney draught | 23 Pa |
| Max. operating overpressure of water | 250 kPa |
| Pressure loss of water (ΔT 10K) | 4,0 kPa |
| Pressure loss of water (ΔT 20K) | 0,8 kPa |
| Boiler weight | 405 kg |
| Diameter of the flue gas outlet | 150 mm |
| Boiler height „A“ | 1 240 mm |
| Boiler width „B“ | 700 mm |
| Boiler depth „C“ | 1 190 mm |
| Length of the feeding chamber „D“ | 690 mm |
| Diameter of the flow connection | G 6/4" " |
| Diameter of the return connection | G 6/4" " |
| Grade of protection | 21 IP |
| Electrical input | 38 W |
| Boiler efficiency | 85,3 % |
| Boiler class | 3 |
| Flue gas temperature by nominal output | 225 °C |
| Flue gas flow by nominal output | 0,021 kg/s |
| Max. noise level | 65 dB |
| Fuel type | Wood logs with relative humidity 12 % – max. 20 %, Ø 50–150 mm |
| Average fuel consumption | 9,75 kg/h |
| Approximate wood consumption per season | 1 kW = 0,9 m3 |
| Max. length of wood logs | 650 mm |
| Time of operation by max. output | 3 h |
| Volume of water in the boiler | 78 l |
| Recommended volume of the accumulation tank | 900 l |
| Connection voltage | ~ 230 / 50 V / Hz |
| Range to set the heating water temeprature | 65 – 90 °C |
| Range to set the room temperature | 10 – 27 °C |
| Capacity of the contacts of the boiler regulator (Profi version) | ~ 230 V / 2 A |
-
Energy label DP 35 PROFI
-
ATTACK DP 15 - 45 STANDARD / PROFI - Certificate
-
ATTACK DP 35 PROFI - Information sheet
-
ATTACK DP STANDARD / PROFI – Certificate
-
ATTACK DP 75, 95 STANDARD / PROFI – Certificate
-
ATTACK SLX, DPX, DP STANDARD / PROFI / LAMBDA Touch / COMBI Pellet – Brochure
-
ATTACK DP STANDARD / PROFI – Instructions for use
