ATTACK DPInstalation example ATTACK DPPreview of the comprehensive solution ATTACK


85% efektivita
  • Modern design
  • Output range of 45 kW
  • Burns soft and hard wood
  • Large combustion chamber is available enabling longer heating at one load
  • Possibility to load big wood logs
  • High combustion efficiency
  • Low fuel consumption
  • Low emissions
  • Minimum of waste
  • Simple use and cleaning
  • Automatic boiler stop when fuel burns out
  • Flue ventilator ensures balanced and effective combustion and dustless operation
  • Modulated fan speed
  • quipped with the cooling circuit against overheating of water in the boiler
  • Quality boiler steel of 6mm thickness is used for boiler production
  • Refractory pieces are resistant up to the temperature of 1350°C
  • Boiler fulfills criteria of the highest class under the European norm EN303-5
DP Standard

The ATTACK DP 45 STANDARD wood gasifying boiler is intended for economical and ecological heating of the family houses, small plants, work stations and similar objects. Wood is the main fuel for the ATTACK boilers. By full utilization of the feeding chamber there is possibility of the continual burning for 8- 12 hours.

The wood gasifying boiler ATTACK DP Standard is controlled by the boiler and the flue gas thermostat.

Main Advantages of ATTACK DP Boilers
The wood gasifying boiler ATTACK DP is a modern boiler that gets maximum from wood thanks to its technology and saves the environment by ecological combustion. The wood is a favourite fuel, as it produces comfortable warmth and grows right outside your door. The boiler body cooled by water is the basic part of the boilers ATTACK DP. The welded part is made from steel plates of 6 mm thickness. The exchanger can be reached by opening the feeding door, in order to enable easier cleaning.

The manufacturer basically adjusts the flap for primary and secondary air. The primary air comes into the feeding chamber, the secondary air flows into the nozzle. Gasification of wood and the following combustion of the wood gas ensures optimal burning of all combustible contents. The combustion is regulated by the flue gas fan. Boiler body is isolated by a mineral wool. The boiler covering is treated by a powder paint.

Nominal output (Standard version) 45 kW
Output range (Profi version) - kW
Heat exchange area 1,95 m²
Volume of the feeding chamber 190 dm³
Dimension of the feeding door 235 x 445 mm
Prescribed chimney draught 23 Pa
Max. operating overpressure of water 250 kPa
Pressure loss of water (ΔT 10K) 6,1 kPa
Pressure loss of water (ΔT 20K) 1,1 kPa
Boiler weight 430 kg
Diameter of the flue gas outlet 150 mm
Boiler height „A“ 1 240 mm
Boiler width „B“ 700 mm
Boiler depth „C“ 1 295 mm
Length of the feeding chamber „D“ 790 mm
Diameter of the flow connection G 2" "
Diameter of the return connection G 2" "
Grade of protection 21 IP
Electrical input 48 W
Boiler efficiency 86 %
Boiler class
Flue gas temperature by nominal output 220 °C
Flue gas flow by nominal output 0,027 kg/s
Max. noise level 65 dB
Fuel type Wood logs with relative humidity 12 % – max. 20 %, Ø 50–150 mm 
Average fuel consumption 11,75 kg/h
Approximate wood consumption per season 1 kW = 0,9 m3 
Max. length of wood logs 750 mm
Time of operation by max. output 3 h
Volume of water in the boiler 87 l
Recommended volume of the accumulation tank 1 200 l
Connection voltage ~ 230 / 50 V / Hz
Range to set the heating water temeprature 65 – 90 °C
Range to set the room temperature 10 – 27 °C
Capacity of the contacts of the boiler regulator (Profi version)
Customer service
Customer service