The wood gasifying boilers ATTACK DPX
product line 6000 in the versions Standard, Profi, Lambda and Combi Pellet are intended for economical and ecological heating of dwelling houses, cottages, small plants, work rooms and similar objects. Prescribed fuel for DPX boilers is dry wood. At full utilization of the hopper there is possibility of the continual burning for 8-12 hours.
The new boiler line ATTACK DPX is equipped with the more efficient tubular exchanger flue gas – water. Special movable turbulators installed inside the exchanger serve to brake and to make the turbulent flow of the flue gas through the exchanger. Thereby it comes to higher heat transfer
through the steel exchanger wall into the heating water.
From technical view it is a boiler line with high efficiency
, low flue gas temperature and more effective combustion process. Achieved efficiency of the ATTACK DPX boiler is up to 91 %. By installation of more efficient boiler of the ATTACK DPX line it comes to significant decrease of the operating costs, projected into the fuel savings, in comparison with less efficient boilers that combust same fuel.
From the social-wide view, it is an enviroment-friendly source, combusting wooden biomass, which is a kind of CO2-neutral fuel. Considering the harmful emissions, the average concentration of CO value in the flue gas, is during operation of the LAMBDA version under the level of 200 mg/m3 related to 10 % of O2. Under the valid European norm EN303-5, classifying the solid fuel boilers by efficiency and emissions to individual classes, the ATTACK DPX boiler (version LAMBDA) reaches 25 times lower concentration of harmful CO emisions in the flue gas incomparison with the allowed level of this norm!
Modifications of wood-gasifying boilers ATTACK DPX
Wood gasifying boiler "ATTACK DPX" is equipped with three types of regulation: STANDARD, PROFI, LAMBDA and one type of burner extension: COMBI PELLET.
The wood gasifying boiler ATTACK DPX Standard is controlled by the boiler and the flue gas thermostat
Wood gasifying boiler ATTACK DPX Profi is controlled by the electronic regulator for regulation of temperature
of the wood burning warm water boilers. Advantage of the PROFI version of the ATTACK® boilers in comparison with the Standard version represents the higher user comfort and option to regulate the boiler output to achieve optimum parameters by wood combustion. The regulator measures temperature of water in the boiler permanently and indicates it on display and also controls flue gas fan and the C.H. pump.
The wood gasifying boiler ATTACK DPX Lambda disposes with the most advanced technology of the combustion process
control to achieve the excellent values of emissions and efficiency. Controller can individually regulate amount of the primary and the secondary air, adequately to data about oxygene content from Lambda probe, boiler temperature and flue gas temperature. All the operation parameters are displayed on the well-readable multiline LCD display. The parameters can be change via buttons placed on the control panel of the boiler. Eventual error or warning messages are signalized bflickering LED diodes.
This innovative solution brings higher comfort thanks to the automatic pellet burner, which is simply installed in the boiler, and the advantage of the cheapest heat energy gained from wood in the wood gasifying boiler. By installation of the burner into the steel body of the boiler ATTACK SLX you get the combined boiler for solid fuel and pellets with adjustable output
, automatic grate cleaning, automatic start and termination of the burning process. The pellet burner is placed on a movable construction, which enables to insert the boiler easily into the upper door of the boiler and to remake the wood gasifying boiler into the pellet boiler.